Element ERFD19CGCS User Manual page 11

Operating instructions
Refrigerator settings
• Press the refrigeration key to adjust the refrigeration set gear, each press the
refrigeration key once, the gear change one gear, the order is as follows:
Freezer settings
• Press the refrigeration key to adjust the refrigeration set gear, each press the
refrigeration key once, the gear change one gear, the order is as follows:
3
Note: The temperature of each gear is within ±2 of the set temperature, and the actual
situation is slightly different according to the load situation.
Alarm off
• When a fault alarm occurs, quickly press the alarm off key, and the fault alarm
sound is canceled.
Open the door and alarm
• When the freezer door or refrigerator door opens for 120 seconds without shutting
down or not closed well, the buzzer alarms until the freezer door or refrigerator
door closes. Or press the alarm off key to cancel the buzzer alarm.
Standby mode
• Press the alarm off key for 3 seconds to enter standby mode, cooling stops, light
turns off, and the display is off . In standby mode, hold the alarm off for 3 seconds,
return to normal control.
Fault indication
• The following warnings appearing on the display indicate corresponding faults of
the refrigerator. Though the refrigerator may still have refrigerating and freezing
functions with the following faults, the user should contact a maintenance
specialist for maintenance, so as to ensure normal use of the refrigerator.
Fault Code
LED1/LED2 flashing
LED1/LED5 flashing
LED1/LED3 flashing
LED2/LED4 flashing
LED1/LED4 flashing
LED2/LED5 flashing
46 ℉
℉
-2
Refrigerator temperature sensor fault
Freezer temperature sensor fault
Freezing frost sensor faults
Communication failure
Ambient temperature sensor faults
Humidity sensor error
39 ℉
℉
Fault Description
9
36 ℉
-9 ℉