Table of Contents
Advertisement
Instruction
Manual
Operation
Space Ball perimeter foot switch
6
The height of the SWOP physio tables is adjusted from 6 different points located around the base of the table, at floor level.
Two semicircles are placed on each long side of the table; one is placed at the front side (head section) and the other at the
end side (foot section). All this activating points are part of the same platform located under the table base.
The Space Ball perimeter switch works as follows: if the therapist is located in one side of the table, pull or push the activating
point towards the left or right direction to move the table up and down. When the therapist is located in the head or legrest sec-
tions push the mechanism forwards or backwards to move it up and down.
The Space Ball foot switch is activated by pulling, pushing or pressing the activating points shown in picture below.
NEUTRAL
PULL FORWARD / INWARD
PULL BACKWARD / OUTWARD
11
Advertisement
Table of Contents
