Table of Contents
Advertisement
Operation
Hand controller
The height of the table can be adjusted using the hand
controller equipped as standard. To lift the table, simply
push the UP button on the hand switch. Once the desired
height is achieved, release the button. To lower the table,
do the same operation with the DOWN button.
You can hang the hand controller on the hooks placed
at both sides of the table to have easy access when its
height has to be adjusted.
Foot controller
A foot controller is available as an option and it can be ordered separately. To lift the table, simply press the UP button on
the foot switch. Once the desired height is achieved, realease the button. To lower the table, do the same operation with the
DOWN button.
In order to use both the hand controller and the foot controller simultaneaously, you need a branched cable and you must
plug it into the control box. See instructions in the next page.
6
Up
Down
Instruction
Manual
Down
Up
11
Advertisement
Table of Contents
