Installation And Connection; Installing The Pump - KNF N838 E Series Translation Of Original Operating And Installation Instructions

Installation and connection

Mounting dimen-
sions
20
6 Installation and connection
Only install the pumps in accordance with the operating pa-
rameters and conditions described in Chapter 3 Technical
data [} 12].
à
Observe the safety instructions (see Chapter 2 Safety
[} 6]).
NOTICE
DANGER

6.1 Installing the pump

à
Store the pump at the installation site to allow it to adapt
to the ambient temperature before installation (condensa-
tion must not be allowed to form).
à
For mounting dimensions, see the following illustrations:
Translation of Original Operating and Installation Instruction, KNF
Damage due to particulate entering
your pump
à
Take protective measures against
allowing particulate entering the
pump.
Risk of dangerous gas mixtures during
pump operation
Depending on the medium being trans-
ferred, breakage of the media-contact-
ing components can result in a danger-
ous mixture if the medium mixes with
the air in the compressor housing or
the surroundings.
à
Before using a medium, check the
compatibility of the media-con-
tacting components (see 3 Tech-
nical data [} 12]) with the
medium.
Diaphragm pump N838_E
347394-347605 09/23