Advertisement
Problem
The appliance does not work
.
Dust is escaping from the motor
cover.
Power tool take off socket does
not work.
Low suction power and high
operating noise/vibrations
The air flow regulator is still
flashing red after completion of
filter cleaning operation.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
Possible cause
No power
Functional fault in the mains
cable, switch or motor.
The cartridge filter is missing or
damaged.
Foam filter accidentally fitted
when dry vacuuming.
Power tool wattage is not
compatible with the power tool
take off socket.
Incorrect operating mode
selected.
Dust bag or disposable bag is full
Suction nozzle, hose, or tank
inlet is blocked.
Cartridge filter is blocked.
Float valve has closed.
Power regulator switch is set to
minimum.
Suction nozzle, hose or tank inlet
is blocked.
The cartridge filter is heavily
contaminated.
The container is full.
01284 703534
Original Language Version
Solution
Check the power supply and
fuse.
Have damaged part checked by
qualified personnel or contact
Sealey stockist.
Fit cartridge filter or replace it.
Replace foam filter with the
cartridge filter.
Check wattage is compatible with
the power tool take off socket.
Ensure the switch is moved into
position II.
Replace dust or disposable bag.
Check the suction nozzle, hose
and tank inlet for obstructions.
Remove the cartridge filter and
clean.
Empty the container of any liquid
waste and ensure the float valve
(located under the filter) is able to
move freely.
Adjust variable power regulator.
Check the suction nozzle, hose
and tank inlet for obstructions.
Remove and clean or replace
with a new filter.
Empty the container.
sales@sealey.co.uk
www.sealey.co.uk
PC380M Issue:1 08/04/21
Advertisement
