Display Panel (A); Before You Start (B); Temperature Setting (C) - Wine Cell'R Diamond WC26SSTDZ6 Instruction Manual

Temperature increase (+)
Increases the set temperature.
Decrease in temperature (-)
Reduces the set temperature.
Temperature in Celsius or Fahrenheit
By simultaneously pressing the + and - controls with the locked panel changes the
temperature display to Fahrenheit or Celsius.
Zone selection (Dual zone only)
Press to select the upper zone (left digits) or the lower zone (right digits) when setting
temperatures. (left digits will flash) or the lower zone (right digits will flash)
(a) Display panel
The control panel has a "sleep mode" function to hide the control buttons and display digits.
If you gently/shortly press the "on/off" button, all the control buttons will turn off; then, if
you gently touch one of the buttons, the whole panel will turn on again.
You also have the option of turning off the temperature digit display when the control panel
goes into sleep mode while locked. Simply press and hold the LIGHT button for 3 seconds;
the temperature digits will darken. If you hold down the LIGHT icon for 3 seconds, this
function will be reversed.
(b) Before you start
The wine cabinet must be installed in a location where the ambient temperature is between
60-80 °F or 15-27 °C. If the ambient temperature is outside this recommendation, the
performance of the wine cabinet may be affected. Installing your appliance in extremely
cold or hot conditions may cause temperature fluctuations inside your wine cabinet.
(c) Temperature setting
NOTE: The temperature reading indicates the actual temperature of the wine cabinet, it
temporarily displays the temperature set during the adjustments, then returns to the
temperature read inside after 5 seconds.
13