THE PERFECT FIT
HANDLEBAR ADJUSTMENTS
HANDLEBAR ANGLE
1. Securing the handlebar clamp bolts
the four nuts (located on each bolt's opposite end).
Take care to avoid damaging hand warmer/brake switch wires when moving
2. Adjust the handlebar forward or rearward to the desired angle.
3. Be sure the handlebar, brake lever and throttle lever operate smoothly and
do not hit the gas tank, windshield or any other part of the machine when
turned fully to the left or right. If necessary, adjust the left and right hand
controls. See page 46.
4. Tighten the handlebar clamp nuts. Do not over-torque.
48
q
with an Allen wrench, loosen each of
CAUTION
components.
TORQUE
Handlebar Clamp Nuts
7 ft-lbs (9.5 N·m)