[al Loading Mecha Assy
@
Remove four Screws.
@) Tum the Short SW to short side.
@
Remove three Flexible Cables and a Connector.
@ Rear View
DVDM
Assy
<¢um
Side
Loading Mecha Assy
DVDM
Assy
@
Remove the Bridge (Screw x2).
Q) Pull out the Tray and remove it while unhooking a hook.
¢& Caution in the Tray Insertion
i
tae
gi pee
ee
ee
1In the Tray insertion, insert it after matching a triangle mark
lof the Loading Base and a position of pin of the Drive Cam.
Triangle Mark
= Loading Base
83