Advertisement
Technical specifications
Specification
Description
Ethernet network
Ports 1–8: Gigabit Ethernet with RJ-45
interfaces
connectors that support 100BASE-TX and
1000BASE-T
Uplink port
Port 9: 1G/10G SFP+
Fanless
0 dBA
Power adapter
12V @ 1.5A DC input
Power consumption
4.63W
Dimensions (W x D x H)
9.3 x 4.0 x 1 in. (236 x 102 x 27 mm)
Weight
1.27 lb (575 g)
Operating temperature
32 to 104° F (0 to 40° C)
Operating humidity
10 to 90% relative humidity, noncondensing
Maximum operating
10,000 ft. (3,000 m)
altitude
Storage temperature
–4 to 158° F (–20 to 70° C)
Storage humidity
5 to 95% relative humidity, noncondensing
Maximum storage
10,000 ft. (3,000 m)
altitude
Electromagnetic
FCC class B device, EU-RoHS
certifications and
compliance
Safety certifications
CB, CE class B, VCCI class B,
C-Tick/RCM class B
Supported Modules
Model
Description
1G Fiber SFP Transceivers
AGM731F
NETGEAR 1000BASE-SX SFP LC Transceiver (multimode,
1000m OM4, 550m OM3 50/125µm, 275m OM2/OM1
62.5/125µm)
AGM732F
NETGEAR 1000BASE-LX SFP LC Transceiver (single
mode, 10km 9/125µm)
1G Copper SFP Transceiver
CAUTION:
The SFP+ port on the GS108X supports 10G on fiber
modules only. It does not support 10G copper modules and will
not pass traffic through a 10G copper module. However, 1G copper
modules are supported.
AGM734
NETGEAR 1000BASE-T SFP RJ45 Transceiver
10G SFP+ DAC
AXC761
NETGEAR 10G Direct Attach SFP+ to SFP+ 1 Meter
Passive DAC Cable
AXC763
NETGEAR 10G Direct Attach SFP+ to SFP+ 3 Meter Passive
DAC Cable
10G Fiber SFP+ Transceiver
AXM761
NETGEAR 10GBASE-SR SFP+ LC Transceiver (multimode,
550m OM4, 300m OM3 50/125µm, 33m OM2/OM1
62.5/125µm)
AXM762
NETGEAR 10GBASE-LR SFP+ LC Transceiver (single mode,
10km 9/125µm)
AXM764
NETGEAR 10GBASE-LR LITE SFP+ LC Transceiver
(single mode, 2km 9/125µm)
Support and Community
Visit netgear.com/support to get your questions answered and access the
latest downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
For regulatory compliance information including the EU Declaration
of Conformity, visit netgear.com/about/regulatory/. See the regulatory
compliance document before connecting the power supply.
Do not use this device outdoors. If you connect cables or devices that are
outdoors to the switch, see kb.netgear.com/000057103 for safety and
warranty information.
Applicable to 6 GHz devices only: Only use the device indoors. The operation
of 6 GHz devices is prohibited on oil platforms, cars, trains, boats, and aircraft,
except that operation of this device is permitted in large aircraft while flying
above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is
prohibited for control of or communications with unmanned aircraft systems.
NETGEAR, Inc.
NETGEAR INTERNATIONAL LTD
350 East Plumeria Drive
Floor 6, Penrose Two,
San Jose, CA 95134, USA
Penrose Dock, Cork, T23 YY06, Ireland
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc.
Any non-NETGEAR trademarks are used for reference purposes only.
Advertisement
