Table of Contents
Advertisement
USING THE TOP CONTROL OF THE PROJECTOR
will appear. This shows the current picture settings.
2. You can adjust the various settings by increasing or decreasing the levels,
shown as numbers. The items and the range of the levels that you can
BRIGHTNESS
adjust are summarized in the table below.
3. Move the arrow to an item that you want to adjust by pressing the MENU
BUTTON. The arrow will cyclically move downwards one by one each time
the MENU BUTTON is pressed.
4. To increase the level, press LEVEL (+) BUTTON. To decrease the level,
press LEVEL (-) BUTTON.
V-POSITION
6. If you do not want to store the settings, move the arrow to QUIT and then
press the LEVEL (+) BUTTON.
The settings changed are temporarily
effective until you turn off the MAIN ON/OFF switch.
7. To recall the settings from the memory that you have stored, move the
arrow to RESET and then press the LEVEL (+) BUTTON. You can adjust
the settings again if needed.
Q K |
_
A]
32 uj
u
CONTRAST
= || MIS
Co KAKA
H-POSITION
B
Hee
TABLE OF PICTURE IMAGE ADJUSTMENT
H. POSITION
RIGHT
0-4—»— 255
LEFT
FINE SYNC
Adjust the picture as necessary to
eliminate flicker from the display.
0 -«—
127
Some video noise of flicker on this compressed XGA image cannot be
eliminated even though you try to make a FINE SYNC adjustment.
— 29 —
Advertisement
Table of Contents
