Table of Contents
Advertisement
REMOTE CONTROL BATTERY INSTALLATION
Remove the battery
Slide the batteries into the
4
Replace the compart-
compartment lid.
s
;
compartment.
.
—
ment lid. `
É
ATTI
a
Note: For correct polarity (+ and -
terminal), be sure the battery
terminals are in contact with
the pins in the compartment.
1%
'USING THE REMOTE CONTROL UNIT
Point the remote control toward the projector (Receiver window) whenever pressing the buttons. Maximum operating
range for the remote control is about 16.4' (bm) and 60°
front and back of the projector.
16.4
(5 m)
l
To insure safe operation, please observe the following precautions:
Use (2) AA type manganese or alkaline batteries.
Change two batteries at the same time.
Do not use a new battery with a used battery.
Avoid contact with water.
Do not drop the remote control unit.
If batteries have leaked on the remote control, carefully wipe the case
clean and load new batteries.
—94—
Advertisement
Table of Contents
