Advertisement
Cabled pairing
This process is done using Jabra Direct.
1. Plug the Link 400 into a USB port on the computer.
2. Go to Jabra Direct > Pairing > Cabled pairing, and click Pair.
3. Follow the onscreen instructions.
4. When your headset appears under Available headsets, click Pair.
5. When pairing is complete, click OK and disconnect the cable.
https://www.apac.jabra.com/supportpages/jabra-engage-65/9553-553-
117/faq/661a3222-cb5a-4c73-b509-7a94441a8e4b
31/12/2023 01:45
Page 2 of 4
Advertisement
