Advertisement
ASSEMBLY AND INSTALLATION
BEFORE YOU GET STARTED
Spread cushioning flat to lay the TV on. This will help to prevent damage.
1. Stand assembly
a. Attach stands to base of TV.
b.
Insert two 18 mm screws for each stand, and use Phillips head screwdriver
(not supplied) to tighten.
1a
2. Remote control assembly
a. Open the battery compartment cover on the back side.
b. Insert two 1.5V AAA size batteries, making sure to match the polarity markings
(+ / -) of the batteries with the diagram inside the compartment.
c. Replace battery compartment cover.
2a
1b
2b
BA4X18 (4 PCS)
2c
Advertisement
