Recoil Start (Pull Start) - Guardian 70ES Operator's Manual

Recoil Start (Pull Start)

1. First turn the fuel valve to the ON position by aligning the fuel valve knob with this
symbol.
2. Next, turn the engine ignition switch to the ON position. This position breaks the ignition
electrical path to Ground and allows spark at the spark plug when the engine is turning
over.
3. Firmly grasp the recoil starter rope handle and with strength pull to full extent. Repeat
as required and also apply the manual choke as required to start engine
4. To stop the engine, turn the ignition switch back to the off position..
23