Advertisement
AV-28WFT1EPG
AV-28WFT1EIS
AV-28WFT1EPS
AV-32WFT1EPG
AV-28WFT1EKS
AV-32WFT1EPS
AV-28WFT1EK
AV-32WFT1EKS
Measurin
a
Test point
Adjustment part
Description
instrument
Adjustment
Signal
2.DRIVE
The adjustment for Low Light WHITE
BALANCE
Should be
of WHITE
generator
finished.
BALANCE
i
a
Set the PICTURE MODE to NORMAL.
(High Light)
Remote
(B) * * *
.
Receive a black and white signal (colour off).
control unit
.
Select 2.V/C from the SERVICE MENU.
Select 2.DRIVE with the FUNCTION UP/DOWN key.
Change the screen colour to white with 4 key or 7 key (Drive of
Red), 6 key or 9 key (Drive of Blue).
Press the MENU key, and memorize the set values.
REMOTE CONTROL UNIT
O ®©@ ®
DRIVE (R) &
©
©
DRIVE
(B)
DRIVE (R) W
(7)
(9)
DRIVE
(8) W
Adjustment
Remote
3.BRIGHT
.
Receive any broadcast.
of
control unit
.
Select 2.V/C from the SERVICE MENU.
SUB BRIGHT
.
Select 3.BRIGHT with the FUNCTION UP/DOWN key.
.
Set the initial setting value with the FUNCTION -/+ key.
.
If the brightness is not the best with the initial setting value,
make fine adjustment until you get the best brightness.
.
Press the MENU key and memorize the set value.
Adjustment
Remote
4.CONT.
.
Receive any broadcast.
of
control unit
.
Select 2.V/C from the SERVICE MENU.
SUB CONT.
.
Select 4.CONT with the FUNCTION UP/DOWN key.
.
Set the initial setting value with the FUNCTION - or + key.
.
If the contrast is not the best with the initial setting value,
make fine adjustment until you get the best contrast.
.
Press the MENU key and memorize the set value.
24
No. 51694
Advertisement
