Table of Contents
Advertisement
1 .
Read these instructions .
2 .
Keep these instructions .
3 .
Heed all warnings .
4 .
Follow all instructions .
5 .
Do not use this apparatus near water .
6 .
Clean only with a dry cloth .
7 .
Do not block any ventilation openings . Install in
accordance with the manufacturer's instructions .
8 .
Do not install near any heat sources such
as radiators, heat registers, stoves or other
apparatus (including amplifiers) that produce
heat .
9 .
Do not defeat the safety purpose of the
polarized or grounding-type plug . A polarized
plug has two blades with one wider than the
other . A grounding-type plug has two blades
and a third grounding prong . The wide blade
or the third prong is provided for your safety . If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet .
10 . Protect the power cord from being walked on
or pinched, particularly at plugs, convenience
receptacles and the point where they exit from
the apparatus .
11 . Only use attachments/accessories specified by
the manufacturer .
12 . Use only with the cart, stand,
tripod, bracket or table specified
by the manufacturer or sold with
the apparatus . When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over .
13 . Unplug this apparatus during lightning storms or
when unused for long periods of time .
14 . Refer all servicing to qualified service personnel .
Servicing is required when the apparatus has
been damaged in any way, such as power supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped .
15 . Do not expose this apparatus to dripping or
splashing and ensure that no objects filled
with liquids, such as vases, are placed on the
apparatus .
16 . To completely disconnect this apparatus from
the AC Mains, disconnect the power supply cord
plug from the AC receptacle .
17 . The power supply cord (sometimes referred to
as the "Mains Plug") is used as the disconnect
device and shall remain accessible and operable
at all times .
Important Safety Instructions
4
18 . Do not expose batteries to excessive heat such
as sunshine, fire or the like .
19 . Open flame sources, such as lighted candles,
should NOT be placed on the apparatus .
WARNING: To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or
moisture.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated "dangerous voltage"
within the product's enclosure that may
be of sufficient magnitude to constitute a
risk of electric shock to persons .
The exclamation point within an
equilateral triangle is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the product .
FCC Required Text:
NOTE:
This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules . These limits are
designed to provide reasonable protection against
harmful interference in a residential installation . This
equipment generates, uses, and can radiate, radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications . However,
there is no guarantee that interference will not occur
in a particular installation . If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna .
• Increase the separation between the
equipment and receiver .
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected .
• Consult the dealer or an experienced radio/TV
technician for help .
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment .
Advertisement
Table of Contents
Troubleshooting
