Table of Contents
Advertisement
AC Power Plug
CAUTION! Typically a preamp/receiver's switched outlet is not rated for a power
amplifier . The Proficient PAS-A4100 draws 400 watts maximum from an AC wall
outlet respectively . Use a dedicated AC wall outlet along with the amplifier's auto
turn on circuit to ensure adequate power .
STEP
1. Plug the female IEC socket of the supplied
AC power cord (the supplied power cord
is designed for 120V AC wall outlets), or
use an appropriate IEC AC power cord
to match the electrical wall outlet you
are using (e.g. 240V AC), into the IEC
receptacle on the rear of the amplifier.
2. Plug the male end of the AC power cord
into a correctly grounded wall outlet.
Installation
DESCRIPTION
Just like a computer or printer, the Proficient
4-Channel Amplifier has an AC cord which
unplugs either at the amp or at the wall for
your convenience.
If you use a grounded power strip, surge
suppressor or extension cord, verify that
proper ground is maintained.
16
Advertisement
Table of Contents
Troubleshooting
