Table of Contents
Advertisement
Speaker Wire Connections
BARE WIRE
Unscrew the red or
black plastic knob,
insert the bare wire
end into the opening,
and then tighten the
knob until the wire is
securely clamped .
STEP
1. Label all wires.
2. Connect one stripped wire end or
banana plug to the black terminal
and one to the red terminal.
CAUTION! All speaker wire connections must be made with the amplifier off .
Installation
DESCRIPTION
If you label the wires for their destination, rather
than which terminal of the amplifier they are
connected to, it will be easier to reconfigure your
system in the future.
A. Split the speaker wire insulation so that at least
two inches of each conductor are separated.
B. Strip one half inch of insulation from the end of
each conductor of the speaker wire.
C. Attach banana plugs or twist the strands
of wire together and insert them into the
appropriate binding post.
14
BANANA PLUGS
There are many types of
banana plugs, some crimp,
some solder . The gold
banana plug has 3 quick-
connect binding post for the
bare wire on the body of the
plug . A banana plug is simply
inserted into the jack at the
end of the amplifier's binding
post . Dual banana plugs will
fit the binding post .
Advertisement
Table of Contents
Troubleshooting
