Specifications /9 - Sony MEGA BASS CFD-560 Operating Instructions Manual

Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
With 3.2-ohm loads, both channels driven from 150-15,000 Hz; rated 2 W per channel-minimum
RMS power, with no more than 10 % total harmonic distortion in AC operation.
BL epee te end,
Pata tae C R A M Ge ae ge CD Pace: Se PEI BR TBE ty ae PR Egg Oe aye ie, TE Lae AW
ol! EE ER Lb Se eas oe eg ee al Oa, Pad Se eee Rg ae Feb Bictn ys Spas lge Ee a
Power requirements 240 V AC, 50 Hz (Australian model)
System Compact disc digital audio system 120 V AC, 60 Hz (Other modeis)
Laser diode properties Material: GaAlAs DC 12 V, 8 size D (R20) batteries
Wave length: 780 nm Power consumption Canada model: AC 27 W
Emission duration: Continuous Other models: AC 25 W
Laser output: Less than 44.6 »W Battéry life For CD radio cassette-corder:
(This output is the value measured at a distance FM recording Tape playback CD playback
of about 200 mm from the objective tens Sony SUM-1 (NS) approx. 11h approx. 6 h approx. 4h
surface on the optical pick-up block.) Sony Alkaline AM1_—approx.16h_ approx. 10h approx. 6 h
Spindie speed 200 r/min (rpm) to 500 r/min (rpm)
(CLV) Dimensions Approx. 678 x 288.3 x 217 mm (wih/d)
Error correction Sony Refined Super Strategy (26% x 11% x 8% in.) incl. projecting parts
Cross Interleave Reed Solomon Code Mass 7.6 kg (16 Ib t2 02) (incl. batteries)
Number of channels 2 Supplied accessories § AC power cord (1)
Frequency response 20-20,000 Hz + 1 dB Remote commander (1)
Wow and flutter Below measurable limit Design and specifications subject to change without notice.
Radio section Optional accessories
Frequency range FM: 87.6-108 MHz Sony DYNAMIC MICROPHONE series
AM: Australian model Sony MDR stereo headphone series
530-1,605 kHz
Models for other countries
§30-1,710 kHz
Antennas FM: Telescopic antenna
AM: Built-in ferrite bar antenna
Cassette-corder section
Recording system 4-track 2-channe! stereo
Frequency response TYPE | (normal) cassette:
40-10,000 Hz
General
Speaker Woofer: 10 cm dia., 3.2 ohms
cone type
Tweeter: 2. cm
Inputs Mixing microphone input jack
(minijack):
Sensitivity 2.45 mV
For low impedance microphone
Outputs Headphones jack (stereo minijack)
For 8-32 ohms impedance
. headphones
Power output 43W+43W
(excluding USA model) (at 3.2 ohms, 10% harmonic in DC
operation)
For Your information | 19