Connecting The Speakers; Choosing Power Sources - Sony MEGA BASS CFD-560 Operating Instructions Manual

Connecting the Speakers
For easy transport, the dual speakers are detachable.
Before you begin listening to music, attach the speaker
boxes and connect the speaker plugs as shown below.
Make sure you tum off the power before making any
connections.
1 Align the grooves and slide the speaker box down until
it snaps into piace. @
2 Connect the right speaker plug to the RIGHT
connectors and the left speaker plug to the LEFT
connectors.
To detach the speakers
Untock the speaker © and slide the speaker box all the way
up and away from the player.
Choosing Power Sources
The CD cassette-corder has two separate power sources.
Use the AC power source (house current) whenever you
record because recording consumes the most power. Use
eight size D (R20) batteries when the CD cassette-corder
becomes a portable.
Operating the player on AC power
Insert one end of the supplied power cord to the AC IN
socket located at the rear of the player @ and the other end
to the wall outlet @.
=
8
to a wail outlet
Operating the player on batteries
To play your CD cassette-corder on batteries, the AC power
cord must be disconnected from the player. Unplug the
player and insert eight size D (R20) batteries (not supplied)
in the compartment.
When to replace the batteries
Replace the batteries when the OPR/BATT indicator dims or
when the player stops operating.
When the batteries are weak, replace all the batteries with
new ones.
Setting Up |