Kenwood 1050CD Instruction Manual page 15

fi To add a track to the program
Press the stop key.
2 Select the track No. to be added.
'1) Select the disc.
ose 4 osBc 2 osc 3 msc 4 oiIaC 5 C2 CoCo ee)
0
Select the track number.
DISC SKIP
Remote control unit
Main unit (Except for 103CD)
=
.
2Q
Remote controt unit
{Except for 103CD)
Main unit
¥
Examples of input
Track No. 20 : (0)
@) Press the P.MODE key.
FP. MaDe
@ To clear tracks from the program
Clearing from the last track
CLEAR
@ Every time the key is pressed, tracks are cleared from the last
track In order.
@ The tracks which are programmed earlier than the track being
played cannot be cleared.
Clearing the whole program
@ Selected tracks can be also completely cleared just by pressing
the [4] key.
Open/Close key ({&])
CHECK key Disc selector keys
| ([DISC1] -[DISC5])}
CLEAR key
00 joobec)
oo lo
{mm}
@ To change a track in the program
Preparation: Press the (m) key to set the unit in the stop
mode.
CHECK
mmc
TRACE WO
Tt a see
@Press until the P-NO to be changed 1s displayed
2 Select the track No. to replace the previous one.
DIBc 1 msc 2 mac 3 OSC 4 oiIBC 5
Co Coc eae
Remote control unit
Main unit iExcept for 103CDi
Press the key while the inaicator 1s lit.
2: Select the track number.
Remote control unit
(Except for 103CD}
4 2
Main unit
Qa Oo
°
Examples of input
Track No. 11 :
Press the key while the indicator is ht.
@ Press the PMODE key.
P.MODE
Auto-Space function
In the programm mode, a space of several seconds is inserted auto-
matically between the programmed tracks (only for music CDs)
This function is provided to facilitate the DPSS function of the cas-
sette deck. However, such a space may also be inserted in case
the sound of two tracks are continued, for example with some cias-
sic music and live recordings.
1O50CD/104CD/103CD (En} 15