Kenwood 1050CD Instruction Manual page 11

Loading/unloading discs
POWER switch
1 Press the POWER switch to ON.
2 Load a CD.
D Open the disc tray. = 2 Place a disc on the tray.
Label side facing up.
Rotary tray
Hold the disc taking care not
to touch the side to be played.
3 Close the tray.
M Changing discs
During playback:
Open the disc tray.
@ Press the [A] key.
'2: Change discs.
@ During playback of disc 1, discs .F and 4 can be
i changed.
@ When changing disc :2 or 8°, press the| DISC SKIP]
key and rotate the rotary tray.
Rotary tray
DISC SKIP key
Disc tray Oper 'Close key
(4):
eWhen inserting three or more discs, use
the key to rotate the tray. oe oem
Up to five discs may be inserted. =
@VVhen inserting a disc while the tray ro-
tates, a malfunction might occur. Insert the
disc when the tray does not rotate.
All disc indicators "" light regardiess of how
many discs are present.
When the unit is stopped: -
'Open the disc tray.
@ Press the [4] key.
2 Press the [DISC SKIP! key, rotate the
rotary tray, and change discs.
1050CD/104CD/103CD (En) = 1