Table of Contents
Advertisement
MOVE battery-powered active boxes
17. AC IN socket
Connect the supplied AC power cable here. First connect the mains cable to the appliance
and then insert the plug of the mains cable into the mains socket.
18. Battery output for external consumers
External devices can be supplied with power from the battery integrated in the unit via this
connection (DC 12V).
19. Fuse
If this fuse is blown, it may only be replaced by trained personnel with an identical model with
the same specifications.
Using the wireless microphones incl. transmitter
You can play back vocals or your speech via wireless microphones or headset through the
speaker box.
1. To use the headset, first insert a battery into the transmitter/body pack. If you want to use
the microphone, please insert the battery there. You can also operate both versions in
parallel.
2. Connect the cable of the headset to the bodypack.
3. Depending on which variant you want to use, you can now switch on the bodypack for the
headset or the microphone.
4. Now carefully turn the volume control of the wireless microphones (13) to the desired
volume.
5. The wireless microphone antennas (12) can then be pointed in any direction to improve
reception.
TWS function
It is possible to connect two Pronomic MOVE battery box systems via TWS stereo
connection, using one speaker as "master" and the other speaker as "slave".
1. Press the mode button on both battery boxes to switch on the Bluetooth function of both
systems.
2. Press and hold the MODE / TWS button to enter the TWS mode. Do this for both boxes.
3. You can hear a connection tone that signals that the products have connected to each
other.
4. Connect your Bluetooth-enabled device to one of the battery boxes. Songs that are played
on the first system will also be played on the second system.
5. Long press the MODE / TWS button again if you want to disconnect the two units.
6
Pronomic MOVE battery-powered active box
2023-01-13
Advertisement
Table of Contents
