Operation & Connections Of The Loudspeaker Module - Pronomic MOVE 112MA-A Operating Instructions Manual

MOVE battery-powered active boxes
Operation & connections of the loudspeaker module
1. Microphone volume control
Controls the input level for the XLR and jack sockets (7, 8 & 10).
2. Treble control
This allows you to control the amount of treble frequencies.
3. Middle control
Here you can control the proportion of the mid frequencies.
4. Bass control
This allows you to control the amount of bass frequencies.
5. Volume control
You can adjust the overall volume with this rotary control.
6. LED indicators
Charge: LED signal to indicate the internal battery charge.
Power: LED signal to indicate the mains voltage.
Clip: LED signal to indicate overriding signal strength. If this LED light up, you should turn
down the volume to prevent damage to the unit.
7. Microphone 1 input / guitar input (jack)
Can be used as input for guitar or as microphone input via 6.3mm jack cable.
8. Microphone 2 input (jack)
Can be used as a microphone input via 6.3 mm jack cable.
9. Line / mic switch
Select the input signal here (microphone or line).
10. Line-In / Microphone input (XLR)
Can be used for Line signals (balanced) or as microphone input via XLR cable.
11. Cinch input /output
LINE-IN connector for external devices that use audio cables with RCA plugs (e.g. CD
players, mixers, or similar).
The MIX-OUT connections output an unbalanced stereo signal to external devices via cinch
cables.
12. VHF Wireless Microphones Antennas
These antennas can be pointed in any direction for better reception while using the wireless
microphones.
13. Wireless microphone volume control
Use these two rotary controls to adjust the level of the wireless microphones.
14. LED indicators
LED signals to indicate the reception strength.
15. ON/OFF switch for wireless microphones
For switching the radio links of the wireless microphones on and off.
16. Mains switch
Switches the system on or off.
2023-01-13 Pronomic MOVE battery-powered active box 5