Advertisement
0)
z
0
(}1
.....
--.j
0
~
10
I
I
I
HOW TO USE THE MENU
FUNCTIONS
(cont'd}
DISPLAY AND SELECTIONS
IN THE <SET-UP
MENU> MODE (SETTING)
You can set the following set-up menu items.
• H. POSITION
• CONTROL LOCK
• ASPECT REMOTE
• V.
POSITION
• STATUS DISPLAY
• WHITE BALANCE
• INPUT REMOTE
( Notes: )
• Parameters for H. POSITION and V. POSITION can be set separately depending on
the video input (Input A (VIDEO), Input B (VIDEO), Input B (Y/C) or Input RGB/
COMPO./SDI) selected
by
the input select buttons on the front panel.
Select the required video input with the input select buttons on the front panel in
advance.
• WHITE BALANCE can be set individually at 6500 or 9300 for the color temperature
value.
Set COLOR TEMP. to the value 6500 or 9300 in the <MENU> screen in advance.
1. While pressing the MENU button, press the
PHASE (
r::!lli )
button.
@/g
The <SET-UP MENU> screen is displayed.
*
The screen automatically disappears when no operation is
performed after about 5 minutes.
2. Press the PHASE (
r::!lli )
or CHROMA (
~
) button
to select the desired menu item.
...
..
IC) IC)
A selection mark(..-.) is put next to the selected item.
Front panel
Function
Contents
button
displayed
PHASE(AA)
"
Forward selection mark(""")
CHROMA(~)
...
Reverse selection mark (""")
3. Press the VOLUME/SELECT button to set.
[Q:1~
Front panel
Function
Contents
button
displayed
VOLUME/
+
Increase (to max. value)
SELECT(+)
~
Forward the setting value
CUTO
Selects CUT OFF setting screen
VOLUME/
-
Decrease (to min. value)
SELECT(-)
..
Reverse the setting value
ORV
Selects DRIVE setting screen
( Notes:)
• For the WHITE BALANCE setting, select the CUT OFF or
DRIVE setting screen, then select the buttons (PHASE/
CHROMA/BRIGHT) corresponding to the function indicated
(R/G/B).
• Press the EXIT (MENU) button to return to the <SET-UP
MENU> screen.
<SET-UP MENU> screen
<SET-UP MENU>
jl
H. POSITION
00
V. POSITION
00
WHITE BALANCE
CONTROL LOCK
OFF
STATUS DISPLAY
: ON
INPUT REMOTE
OFF
ASPECT REMOTE 1
· ,OFF
(j)
=
Elb:)~r;J
f;l8H
1@6
~6
~-~:£?JI
<Front panel button>
G)
Selection mark("'"): Indicates the
menu item you select.
CD
Menu item: Menu items you can
select.
G)
Setting display: Indicates the current
settings (value).
©
Function display: The functions of
the front panel buttons (7 buttons on
the left) correspond to the function
displayed.
Function
Contents
displayed
"
Forward the menu item.
...
Reverse the menu item .
-
Lower the adjustment
value. (to the minimum)
+
Raise the adjustment
value. (to the maximum)
~
Forward the setting value.
..
Reverse the setting value .
EXIT
Exit the <SET-UP MENU>
screen. (release)
ORV
Selects DAV adjustment.
CUTO
Selects CUT OFF
adjustment.
R
Adjusts red signal level.
G
Adjusts green signal level.
B
Adjusts blue signal level.
Turns the ON-SCREEN
display on or off. (This
OISP
function is effective only in
the DRIVE or CUT OFF
adJustment mode.)
Set-up menu items
H. POSITION
V.
POSITION
WHITE BALANCE
l[)RIVC
iRDRIVE -
-
I
lsDRIVE- -
ICUT
OFF
fR:CUT
OFF -
I
fGCUTOFF-
_I ___
18
CUTOFF
-
CONTROL LOCK
STATUS DISPLAY
INPUT REMOTE
ASPECT REMOTE
Purpose
Settings
Adjusts the horizontal position of
the screen(+:
Horizontal position
I
-os--04-••••••--01-00-+01-••••••-+04-+05
shifts to the righV-: Horizontal
position shifts to the left)
Adjusts the vertical position on the
screen(+: Vertical position moves
-os--04-••••••--01-00-+01-••••••-+04-
+05
down/-: Vertical position moves up)
Adjusts the white balance
Adjusts red level
------------
Adjusts blue level
------------
Adjusts red cut off
---------
Selects DRIVE (ORV) or CUT OFF (CUTO) adjustment.
Screen setting is changed to the selected setting mode.
Select R/G/B buttons corresponding to the function display
to adjust.
-------------------
-20--19-·····
.... -01-00-+01-····-+19-
+20
-------------------
-20--19-•••••
- -01-00-+01-····-+19-
+20
-------------------
-20--19-·····
.... -01-00-+01-····-+19-
+20
-------------------
Adjusts green cut off _____
-l
-20--19-•••••
- -01-00-+01-·•·•-+19-
+20
__
Adjusts blue cut off
Sets the operation buttons on the
front panel to control lock mode
Sets the status display of the color
system
Sets external control of input
selection (INPUT A/B)
Sets external control of the aspect
ratio
-20--19-·····
- -01-00-+01-····-+19-
+20
OFF -
ON
ON-OFF
OFF -
A/B
OFF -
ON
4. To set the other set-up menu items, repeat the
procedures 2 and 3.
( Notes:
J
• When the CONTROL LOCK function 1s
set to ON, pressing operation buttons
on the front panel will display the
message "CONTROL LOCK ON!" on
the screen for about 3 seconds.
5. Press the MENU button to quit.
IC)
Front panel
Function
button
displayed
Contents
MENU
EXIT
Ouit (or Release) the <MENU>
screen
• The CONTROL LOCK function is
maintained even when the power is
turned off.
• To tum off the CONTROL LOCK
function, while holding the MENU button
press the PHASE button. Then set the
CONTROL LOCK function to OFF.
• Even when the CONTROL LOCK
function is set to ON, the fo!lowmg
operations are available:
- Power Switch operation
- Volume control with the VOLUME/
SELECT buttons
- External control when INPUT
REMOTE or ASPECT REMOTE is
valid
- Display or disappear of the <SET-UP
MENU> screen
• The STATUS DISPLAY function can be
set to display (ON) or not display (OFF)
the present color system when the
power is turned on or the input signal is
changed. Refer to page 7 for more
information.
• When the INPUT REMOTE function 1s
valid {A/8), pressing the Input A, Input B
or Input RGB/COMPO./S01 buttons will
display the message "REMOTE ON!" on
the screen for about 3 seconds.
• The INPUT REMOTE function is valid
(A/B) after quitting the <SET-UP
MENU> screen.
11
-I
~
.....
0)
(}1
0
(J)
0
C
Advertisement
