Advertisement
z
0
(JI
.....
---I
0
l'v
.....
I
(,.)
4
•
•
I
CONTROLS AND FEATURES
FRONT VIEW-----------
<Front Panel>
D
:fil
[I]
Phase button [PHASE
clli ]
Press this button to set the picture hue adjustment mode.
Adjust the value with the VOLUME/SELECT buttons. Also
used as a control button in the menu function mode.
rn
Chroma button [CHROMA
i;'b]
Press this button to set the picture color density adjust-
ment mode. Adjust the value with the VOLUME/SELECT
buttons. Also used as a control button in the menu
function mode.
@]
Brightness button [BRIGHT
-0 ]
Press this button to adjust picture brightness. Adjust the
value with the VOLUME/SELECT buttons. Also used as a
control button in the menu function mode.
@J
Contrast button [CONTRAST () ]
Press this button to adjust picture contrast. Adjust the
value with the VOLUME/SELECT buttons. Also used as a
control button in the menu function mode.
[fil
Menu button [MENU]
Displays and disappears the <MENU> screen.
Pressing the PHASE button with the Menu button
depressed will display the <SET-UP MENU> screen.
[fil
Volume/Select buttons [VOLUME/
SELECT-
..c-:1
+]
Adjusts the speaker volume. Also used as a control button
in the menu function mode.
II]
Under Scan button [UNDER SCAN]
Reduces the screen size to display the whole screen.
Press the button again to quit Under Scan.
[ID
Input RGB/COMPO./SDI button [INPUT
SELECTIRGB/COMPO./SDIII
Selects the video signal input to the RGB/COMPO.
(analog RGB/Y, 8-Y, R-Y) or SDI terminal and the audio
signal input to the AUDIO RGB/COMPO./SDI terminal on
the rear panel. When selected, the input RGB/COMPO./
SDI indicator
[ill
lights.
( Note: )
• RGB, COMPONENT or SDI signals can be selected in
the <MENU> screen.
I]]
Input B (Y/C) button [INPUT SELECT B
[m]
Selects the video signal input to the VIDEO B (Y/C)
terminal and the audio signal input to the AUDIO 8
terminal on the rear panel. When selected, the input 8
(Y/C) indicator
[ill
lights.
[QI
Input B (VIDEO) button [INPUT SELECT B
[1/IDEOil
Selects the video signal input to the VIDEO B terminal
and the audio signal input to the AUDIO 8 terminal on the
rear panel. When selected, the input 8 (VIDEO) indicator
[ill
lights .
[TI]
Input A (VIDEO) button [INPUT SELECT A
'VIDEOIJ
Selects the video signal input to the VIDEO A terminal and
the audio signal input to the AUDIO A terminal on the rear
panel. When selected. the input A (VIDEO) indicator
[is]
lights.
~
Power indicator
Lights in green when the power is ON.
Lit
: When the power is on.
Unlit : When the power is set to stand-by.
~ Power switch [POWER]
Press this switch to turn the power on or set it to stand-by
mode.
.-.. I
ON
: Power is turned on.
I
c!:,
STAND BY : Power is set to stand-by mode.
IH]
UNDER SCAN indicator
Lights in green when UNDER SCAN is selected.
ffID
Input RGB/COMPO./SDI indicator
Lights in green when Input RGB/COMPO./SDI is selected.
[!ID
Input B (Y/C) indicator
Lights in green when Input B (Y/C) is selected.
[z]
Input B (VIDEO) indicator
Lights in green when Input B (VIDEO) is selected.
~ Input A (VIDEO) indicator
Lights in green when Input A (VIDEO) is selected.
~Speaker
A built-in speaker is located inside the right side panel
when the monitor is viewed from the front.
•
•
•
REAR VIEW--------------
<Rear Panel>
D
To AC outlet
(120 V AC, 50 Hz/60 Hz)~
~~
~Video
A terminals [VIDEO A IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN
: Video signal input terminal
OUT : Bridge-connected video signal output terminal
( Notes:)
*
For corresponding audio signals, use the AUDIO A
terminals
[ill.
• Also refer to BASIC CONNECTION EXAMPLE
on page 13.
~Video
B terminals [VIDEO BIN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN
: Video signal input terminal
OUT : Bridge-connected video signal output terminal
( Notes:)
*
For corresponding audio signals, use the AUDIO B
terminals
w].
• Also refer to BASIC CONNECTION EXAMPLE
on page 13.
~Video
B (Y/C) terminals [VIDEO B Y/C IN/
OUT]
Y/C (S-Video) signal input (IN) and output (OUT)
terminals.
The output terminal is bridge-connected.
IN
: VIC-separated (S-video) signal input terminal
OUT : Bridge-connected VIC-separated (S-video) signal
output terminal
( Notes:)
*
For corresponding audio signals, use the AUDIO B
terminals
[ill.
• Also refer to BASIC CONNECTION EXAMPLE
on page 14.
~RGB/COMPO.
terminals
Input terminals for analog RGB/Y, 8-Y, R-Y signals.
*
The RGB SYNC input terminal is for the external
synchronization (composite synchronization) signal
when an analog RGB signal is input.
( Notes:)
• For corresponding audio signals, use the AUDIO RGBI
COMPO./SDI terminal
[ill.
• When an analog RGB signal is input, be sure to input
the external synchronization signal to the RGB SYNC
terminal.
• Also refer to BASIC CONNECTION EXAMPLE
on page 14.
~Audio
A terminal [AUDIO A IN/OUT]
Input (IN) and output (OUT) terminals for the audio signal
corresponding to the VIDEO A terminals
[W.
The output
terminal is bridge-connected.
IN
: Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
( Notes:)
*
For corresponding video signals, use the VIDEO A
terminal
[W.
• Also refer to BASIC CONNECTION EXAMPLE
on page 13.
5
-I
s::
I
.....
0)
(JI
0
(/)
0
C
Advertisement
