Cleaning The Filters - Bissell MULTICLEAN WET + DRY Manual

Cleaning the Filters

1.
Unplug the vacuum from
the electrical outlet and
disconnect the hose.
4.
Remove the top cover of
drum vacuum and grasp the
plastic filter cage, turning
counter-clockwise to unlock.
Pull up to remove.
7.
Return the dry large fabric
filter and replace top cover,
closing the clips to seal closed.
WARNING
• To reduce the risk of electrical shock, turn power switch OFF and disconnect polarized plug from electrical outlet before
performing maintenance or troubleshooting checks.
• Do not operate vacuum with a damp or wet filter, or without filter or the dirt tank in place. Allow components to dry before
reassembling the dirt tank.
6 BISSELL.com
2.
Undo clips on both sides of
top cover.
5.
Remove the foam filter and
rinse to clean. Allow the filter
to fully dry before reinstalling.
3.
Remove the large fabric
filter and hand wash in cold
water with mild detergent.
Rinse well and air dry for 24
hours.
6.
Once completely dry, return
filters to the dirt tank. Ensure
the filter basket is installed and
surrounding entire tank wall.
Turn clockwise to seal.