Uniden EXAI 3248 Series Owner's Manual page 43

EXAI3248.Qx 12/12/2 8:12 PM Page 41
Selecting the message record time
You have three record time options. The options "1 minute" or "4 minutes" set the
duration for recording the incoming messages. "Announce only" answers the call
with the preset greeting or your personal greeting but prevents the caller from
leaving a message.
1) Press clock/menu four times in standby mode.
You hear "Record time" and the current recording time ([
minutes, [ ] Announce only), and it is displayed on the base. Then you hear the
guidance for setting.
2) Press select/volume
3) Press set to select the new recording time. You hear a confirmation tone, then the
announcement "Record time" and new recording time is announced. After a few
seconds, the system announces "To set message alert, press menu again".
M Announce only feature
The announce only feature plays a prerecorded outgoing message "Hello, no one is
available to take your call. Please call again.", but it will not allow the caller to
leave a message. To set "Announce only", follow the steps above.
To scroll between the prerecorded message or your own personal greeting, press
greeting when the outgoing message is played. If you want to use your own greet-
ing, you may want to change your greeting to omit the prompt "to leave a message".
Refer to "Recording a personal outgoing message" (Greeting) on page 43.
www.uniden.com
or keys until the desired time appears.
T H E I N T E G R A T E D A N S W E R I N G D E V I C E
] 1 minute, [ ] 4
After setting for the
Announce only feature,
you may want to change
your outgoing message if
the message prompts the
caller to leave a message.
But the prerecorded
message changes
automatically.
[ 41 ]