Page 1
LAUNDRY - DISHWASHING - COOKING - COOLING Installation and Operating Instructions 8/6kg 1400rpm Built-In Washer Dryer MIWD8614 Please read these instructions carefully before attempting to install or use this appliance. We recommend that you keep these instructions in a safe place for future reference.
Page 2
Welcome Thank you for choosing this Montpellier appliance. Our appliances have been designed to provide you with the best combination of style, reliability and performance to give you years of trouble-free use. You may be familiar with a similar product, but please take time to read these instructions carefully before installing or using your appliance to ensure you get the most from your purchase.
THANK YOU LETTER Thank you for choosing Montpellier! Before using your new Montpellier product, please read this manual thoroughly to ensure that you know how to operate the features and functions that your new appliance offers in a safe way.
SAFETY INSTRUCTIONS Intended Use The product is intended only for home use and for textiles in household amounts suitable for washing. This appliance is for indoor use only and not intended for built in use. Only use according to these instructions. The appliance is not intended for commercial use.
Page 5
WARNING: Electric Shock Hazard • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. • If the machine is damaged, it must not be operated unless repaired by the manufacturer, its service agent or similarly qualified persons.
Page 6
Installation • Remove all packaging material and transport bolts before using the appliance. Otherwise, serious damage may result. • This appliance is equipped with a single inlet valve and can be connected to the cold water supply only. • Mains plug must be accessible after installation. •...
Page 7
-Accumulated water shall be drained out of the machine. • This appliance is heavy. Transport with care. Never hold any protruding part of the machine when lifting. The machine door can not be used as a handle. Washing Capacity Drying Capacity Model 8.0kg 6.0kg MIWD8614...
PRODUCT OVERVIEW Control panel Drain hose Detergent dispenser Power supply cord Door NOTE The product picture is for illustration only, please refer to real product as reference. Accessories 4 x Cover 1 x Supply hose Owner’s manual, Energy Labels cold water Warranty Card &...
QUICK START GUIDE CAUTION • Before washing, please make sure the machine is installed properly. • Your appliance was thoroughly checked before it left the factory. To remove any residual water and to neutralize potential odors, it’s recommended to clean your appliance before first use.
Page 11
5. Add detergent 4. Close door Main Wash II Softener Prewash I NOTE Detergent need to be added in compartment I if the pre-wash function is selected. 2. Washing 1. Power on 2. Select programme 4. Press Start/Pause to start 3.
PRODUCT INSTALLATION Tools Needed If Installation By Yourself (not included) Installation Area WARNING • Stability is important to prevent the product from wandering! • Make sure the machine is standing level and stable. • Make sure that the product does not stand onto the power cord. •...
Page 13
Unpacking the Machine WARNING • Packaging material (e.g. Films, Styrofoam) can be dangerous for children. • There is a risk of suffocation ! Keep all packaging well away from children. • Remove the cardboard box and styrofoam packing. • Lift the machine and remove the base packaging. •...
Page 14
Levelling the Machine WARNING The lock nuts on all four feet must be screwed tightly against the housing. • Loosen the lock nut. • Turn the foot until it reaches the floor. • Adjust the legs and lock the nuts with a spanner. Make sure the machine is level using a spirit level.
Page 15
There are two main ways to place the end of drain hose: Note: In either option the drain hose must be between 50 cm and 80 cm from the ground. DO NOT Allow drain hose to hang lower than the sink outlet !! •...
OPERATION INSTRUCTIONS Before Each Wash • The ambient temperature of the machine should be 5°C-40°C. If used under 0°C, the inlet valve and draining system may be damaged. If the machine is installed under freezing conditions, it should be transferred to normal ambient temperature to ensure the water supply hose and drain hose can unfreeze before use.
Page 17
Detergent Dispenser Pre wash Main wash Ⅱ Ⅱ Softener Release button to pull out the dispenser CAUTION • Detergent only need be added in “compartment I ”after selecting pre-wash option. Programme Programme Cotton Dry Only Spin Only 1 Hour W/D Jeans Quick Sport Wear...
Page 18
Detergent Recommendations Recommended washing Type of laundry Washing Wash cycles detergent and textile temp. °C Heavy-duty detergent White laundry made Cotton,ECO 40-60 40/60 with bleaching agents from boil-proof cotton and optical brighteners or linen Colour detergent without Coloured laundry Cotton 20/40 bleaching agent and made from cotton or...
Page 19
Control Panel Program Choose appropriate program according to the laundry type. Display The display shows settings, estimated remaining time, options and status messages. Options (refer to pages 23 & 25) Press buttons to change program parameters or select additional functions. Start/Pause Start or pause your program.
Page 22
Programmes 1) The highest temperature reached by the laundry in the wash cycle for at least 5 minutes. 2) Residual moisture after the wash cycle in water content percent and the spin speed at which this was achieved. 3) The ECO 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40°C or 60°C, together in the same cycle.
Page 23
Programmes are available according to the laundry type. Programmes Extra short programme approx, suitable for lightly soiled washing as a small Quick amounts of laundry. Washing the activewear. Sport Wear 20°C 20°C default, can choose cold water. Jeans Specially for jeans. Hand or machine-washable wool or wool-rich textiles.
Page 24
Options Default Default spin Additional Cycle Temp.(℃) speed (rpm) functions 1400 ℃ Dry Level Time Delay NOTE • For the maximum spin speed, program time, and other details of the ECO 40-60 and Wash & Dry programs, please refer to the content on the Product Fiche page. •...
Page 25
Delay Delay Set the Delay function: 1. Select a programme 2. Press the Delay button to choose the time(the delaying time is 0-24 h.) 3. Press [Start/Pause] to commence the delay operation Delay On/Off Choose the Programme Setting time Start Cancel the Delay function: Press the [Delay] button until the display be 0h.It should be pressed before starting the programme.
Page 26
Mute the buzzer Temp. On/Off Start/Pause Press the [Temp.]button for 3sec.the buzzer is muted. To act the buzzer function, press the button again for 3 seconds. The setting will be kept until the next reset. CAUTION • After Muting the buzzer function, the sounds will not be activated any more. Dry Level Press the Dry Level button continuously to choose the dry level: Extra Dry/Normal Dry/ Gentle Dry.
CLEANING AND MAINTENANCE Cleaning and Care WARNING • Always unplug the appliance and close the water tap before cleaning and maintenance. Cleaning the Cabinet Proper maintenance on the machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary.
Page 28
Cleaning the Inlet Filter NOTE • Diminishing water flow is a sign that the filter needs to be cleaned. 1. Close the tap and remove 2. Clean the filter with a brush. the water supply hose from it. 4. Use a brush to clean the 3.
Page 29
Cleaning the Detergent Dispenser 1. Press down the release [ ] on the softener cover and pull the dispenser drawer out of the recess. Clean the inside of the recess with a brush. 2. Lift the softener cover off the dispenser drawer and wash both items with water. 3.
Page 30
Cleaning the Drain Pump Filter WARNING Make sure that the machine has finished the washing cycle and is empty. Switch it off and unplug it before cleaning the drain pump filter. • Be careful of hot water. Wait for water cooling down. Risk of scalding! •...
TROUBLE SHOOTING Whenever there is a problem with the appliance, check if you can solve it following the tables below. If the problem persists, please contact the customer service. Description Possible Cause Solution Door is not closed Appliance does Close the door properly and properly.Clothes are restart.
DISPOSAL AND RECYCLING Important Instructions for Environment Compliance with the WEEE Directive and Disposing of the Waster Product: This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waster electrical and electronic equipment (WEEE). This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life.
BUILT-IN INSTALLATION Appendix Self-tapping screws Hinges Counter magnet Spacer Fixed position paper (ST4*12) (M5*12) (ST4.8*15) Tools Screw driver Automatic driver Ruler Pencil Install Steps 825mm 152.5mm Overview Preparation and assembly of the door The door is open from left to right The door is open from right to left...
Page 34
1: Make the mark on the door Position Paper 2: Fixed position paper on the door. Position Paper Position Paper Left Open Right Open 3: Drill hole on the door 35mm...
Page 35
4: Installation the hinges and spacer 5:Installation the counter magnet Fix counter magnet on the cabinet cover Screw counter magnet on the cabinet cover 6: Installation the door WARNING • When installing the appliance into the kitchen ensure furniture ,if possible, the hoses are placed in either of the two recesses on the back of the appliance.
Product Information Sheet COMMISSION DELEGATED REGULATION (EU) 2019/2014 with regard to energy labelling of household washing machines and washer-dreys Montpellier Domestic Appliances Ltd. Unit 1, Tewkesbury Retail Park, Northway Lane, Tewkesbury, Gloucestershire, GL20 8JU Model identifier: General product parameters: Parameter...
Page 37
Product Information Sheet COMMISSION DELEGATED REGULATION (EU) 2019/2014 with regard to energy labelling of household washing machines and washer-dreys Montpellier Domestic Appliances Ltd. Unit 1, Tewkesbury Retail Park, Northway Lane, Tewkesbury, Gloucestershire, GL20 8JU Maximum temper- Rated Maximum temperature inside...
Your 2 year Manufacturer's guarantee THIS DOES NOT AFFECT YOUR STATUTORY RIGHTS. Your new Montpellier appliance carries a free guarantee which protects you against the cost of repairs during the first 24 months from date of purchase provided that: Any claim is accompanied by evidence of the model reference, model serial number and proof of purchase, such as a Sales Receipt, showing that the appliance was purchased within the 24 months prior to the date of claim.
Page 39
You have a manufacturer’s warranty of 2 years from the date of purchase (proof of purchase must be provided). Our General Terms and Conditions apply. MIWD8614 / Your device / serial number Purchase date: Place of purchase: Customer Service Spare parts for your appliance are available for a minimum of 10 years following EU COMMISSION REGULATION 2019/2023 ANNEX II Ecodesign requirements.
Page 40
Montpellier Domestic Appliances Ltd. Unit 1, Tewkesbury Retail Park, Northway Lane, Tewkesbury, Gloucestershire GL20 SJU www.montpellier-appliances.com The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
Need help?
Do you have a question about the MIWD8614 and is the answer not in the manual?
Questions and answers