Makita DGA404 Instruction Manual page 20

-
13
14
15
16
17
18
19
20
21
22
-
NOTE: *1 Do not use Super flange and Ezynut together.
NOTE: *2 Only for tools with M14 spindle thread.
NOTE: *3 Clip-on cutting wheel guard attachment is not available in some countries. For more details, refer to the
instruction manual of the clip-on cutting wheel guard attachment.
NOTE: *4 For more details, refer to each instruction manual of the guard.
NOTE: *5 Only for model DGA454 / DGA504
For more details, refer to each instruction manual of the guard.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Makita genuine battery and charger
• Accessories listed in "COMBINATION OF
APPLICATIONS AND ACCESSORIES"
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
Application
Wire brushing
Hole cutting
-
Cutting-off
Grinding / Cutting-off
-
-
Cutting-off
-
Grinding
-
100 mm model 115 mm model
Wire cup brush
Wheel guard (for cut-off wheel)
Abrasive cut-off wheel / Diamond wheel
Dual purpose wheel
Clip-on cutting wheel guard attachment *3
Dust collecting wheel guard for cutting-off *4
Diamond wheel
- Dust collecting wheel guard for grinding *5
-
Lock nut wrench
20 ENGLISH
125 mm model
Hole cutter
Cup-type diamond wheel *5