Remove
the
upper
rear cover,
upper
front
cover,
upper left cover, lower front cbver,
and lower rear cover in the order named.
Open the top unit at a right angle (Figure
4-l 3).
Remove
the drum unit guide (left; Figure
4-29).
Disconnect
Jl 12 from
the DC controller
PCB, remove the four screws, and remove
the heat exhaust fan.
@
J112
@
Screws
8
Heat exhaust fan
Figure 4-4
_/-,
4-2
COPMIGHT 019OB CANON INC.
CANON HP-1010 AN.0 OEC. 1900 PAINTEA IN JAPAA (IMPRIME AU JAPONI