Removing The Operation Panel - Pioneer PD-F1005 Service Manual

PD-F905
@ REMOVING THE OPERATION PANEL
dQ) Remove the Bonnet.
Remove the Screws.
Cut the Binder securing the wire material.
Remove the Center Pole. (Refer to the "REMOVING THE DISC RACK")
Shift the Front Panel slightly toward you while paying attention to the back side hooks on the Chassis.
m@ REMOVING THE DISC RACK
a) Open the Hood.
2) Remove the Screws.
8-4 Press the 4 hooks to remove the Center Pole from the Operation Panel.
Disc Rack
Operation Panel