Deleting The Homewhiz Ac- Count Match; Remote Control Function And Using It - Hitachi BD-100XFVEADM Instruction Manual

6.15.3 Deleting the HomeWhiz Ac-
count Match
Follow the following steps in order to delete
a washing machine previously matched
with someone else's account.
1. Turn on your machine by using the On/
Off button.
2. When your machine is running, push and
hold the Remote Control Function but-
ton and End Time Setting buttons for 5
seconds.
3. You will hear warning sound from the
product to notify your request after the
countdown on the screen. Deleting the
match will take a few seconds.
After this operation, you cannot use the
HomeWhiz function of your washing ma-
chine until you do another setup.
Your product does not need to be connec-
ted to the internet in order to delete an ac-
count matching. Your request will be re-
ceived. This matching will be automatically
deleted when the product is first connected
to the internet.
6.15.4 Remote Control Function
and Using It
After HomeWhiz setup, bluetooth will auto-
matically turn on. To activate or deactivate
the Bluetooth connection, please see
Bluetooth 3''.
If you turn off and on your machine while
bluetooth is active, it will automatically re-
connect. In cases such as paired device go-
ing off the range, bluetooth will automatic-
ally turn off. For this reason, you will need
to turn on the bluetooth again if you want to
use the Remote Control function.
You can check the bluetooth symbol on the
display to track your connection status. If
the symbol is continuously on, you have
bluetooth connection. If the symbol is
flashing, the product is trying to connect. If
the symbol is off, you have no connection.
When the bluetooth connection is
on in your product, Remote Control
function will be selectable.
If the Remote Control function can-
not be selected, check the connec-
tion status. If the connection can-
not be established, repeat the initial
setup steps over the product.
WARNING: For safety reasons, the
product door will be locked and re-
main locked regardless of the oper-
ating mode of the product when the
Remote Control function is activ-
ated. If you want to open the door
of the product, you will need to turn
the programme selection knob or
press the remote control key to de-
activate the remote control func-
tion.
When you want to control your washing
machine remotely, after the front lid is
closed, you need to activate the Remote
Control function by pressing the Remote
Control button while the programme knob
is in the Download Programme/Remote
Control position button on the control panel
of your washing machine. Once access is
established to the product, you will see a
screen similar to the one below.
When the Remote Control is enabled, you
can only manage the machine, turn it off
and follow the status through your washing
machine. And all functions except child
lock can be managed through the applica-
tion.
EN / 36