Dosage Selections, Cancella- Tion Or Use Of Powder Deter- Gent - Hitachi BD-100XFVEADM Instruction Manual

3. Remember not to exceed the "Max" sign
when adding liquid detergent or
softener.
4. Close the lid of the compartment.
5. Close the detergent drawer by pushing
lightly.
6. After closing the detergent drawer, the
flashing dosage symbol (
lighting up continuously.
7. It indicates that the compartments are
filled successfully and the detergent
drawer is in its place.
We recommend filling the detergent com-
partment with liquid detergents that can be
used in common for coloured and white
laundry.
If the detergent symbol is flashing even
though the detergent compartments are
filled, the detergent drawer is not seated
properly. Push the drawer so that it is fully
seated.
) starts
5.6.2 Dosage Selections, Cancella-
Liquid detergent cannot be selected in
some of the programs. Powder detergent
must be used in these cases. For more in-
formation, see Programme Table.
If powder detergent is to be used in pro-
grams where the detergent dosing system
is operating, desired amount of detergent is
put into the powder detergent compart-
ment. If the detergent compartment in the
middle is to be used, the automatic dosage
selection must be deactivated.
EN / 17
WARNING
When the detergent drawer is filled
with detergent and/or softener; do
not pull or move the equipment,
and do not tilt it on either side or
back.
Before conducting these opera-
tions, the detergent drawer must al-
ways be removed from the ma-
chine.
If you wish to start the program
while there is no detergent in the
detergent drawer, liquid detergent
dosage must be cancelled and
washing with powder detergent is
required.
Only liquid detergent must be put
inside the liquid detergent dosing
tank and only softener must be put
in the softener dosing tank. Putting
all kinds of liquid and powder
chemicals together inside the tanks
may damage your laundry or your
machine.
tion or Use of Powder Deter-
gent