Table of Contents
Advertisement
1.3.2 Improper and incorrect use
Any use other than those specifically intended by the constructor is deemed improper and incorrect.
The constructor cannot be held liable in the event of any accident caused by improper use. The user is
responsible for all risks deriving from improper use.
The following is a list of examples of improper usage of this tractor which will put the life of the operator
at risk.
- Allowing the tractor to be operated by persons who have not received adequate training.
- Using the tractor in terrain conditions and spaces not classifiable as agricultural working areas or
maintenance areas
- Carrying persons on the tractor without a passenger seat. Transporting persons not seated correctly
in the passenger seat (on tractors equipped with a passenger seat). Carrying a passenger while dri-
ving in the field, even if seated in the passenger seat.
- Using the tractor for competitions or sports events.
- Using the vehicle to herd animals.
- Starting and operating the tractor from outside the cab.
- Exceeding the maximum permissible load.
- Non-observance of the warnings given on the tractor and in this manual.
- Performing repairs and maintenance on the tractor while it is running and/or moving.
- Performing maintenance, cleaning and adjustment without observing the safety rules given in this
manual.
- Modifying the tractor without obtaining prior authorisation from the dealer or constructor.
- Connecting implements/equipment to the tractor that are incompatible with each other and/or with
the tractor, or connecting unauthorised implements/equipment to the tractor.
- Using non-original spare parts.
1.3.3 Electromagnetic compatibility (EMC)
This machine is conformant with EU regulations concerning electromagnetic radiation. However,
interference may be caused by the use of auxiliary equipment. This may occur if the auxiliary equipment
used does not comply with the standards defined by the aforementioned regulations.
This interference may cause severe malfunctions and compromise the safety of the machine.
Follow the instructions given below to avoid problems caused by interference:
- check that all third party equipment installed on the machine bears the CE mark;
- the maximum power of transmitting devices must not exceed the limits set by law in the country of
use of the machine;
- the electromagnetic field generated by auxiliary equipment must never exceed 24 V/m in any posi-
tion near electronic components.
Non observance of these rules will render the manufacturer's warranty of the machine null and void.
GENERAL INFORMATION
1-7
Advertisement
Table of Contents
