Related Manuals for John Greenleaf Rustic Lodge 371W
Summary of Contents for John Greenleaf Rustic Lodge 371W
- Page 2 371W Rustic Lodge Table – Parts List BEFORE BEGINNING ASSEMBLY: Check that the quantities of the parts received match those on parts list below. E — Middle Support — Qty. 1 F — Wood Wedge — Qty. 4 A — Table Top — Qty. 1 B —...
- Page 3 371W Rustic Lodge Table ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Phillips screwdriver, Hammer, 5/32" Drill Bit, Drill, Tape Measure, 1/2" Socket. FIG. 1A FIG. 1 1) Pound the Tack Glides (J) into the bottom of the Feet (D). Using the 3" Lag Bolts (G) and 5/16" Washers (H), attach a Top Support (B) and Foot (D) to each Leg (C).
- Page 4 FIG. 3 3) Center the leg assembly on the bottom of the Table Top (A). Insert the #12 x 2" Screws (I) through the holes in the Top Support (B). Tap them lightly to mark the screw locations on the bottom of the Table Top.
Need help?
Do you have a question about the Rustic Lodge 371W and is the answer not in the manual?
Questions and answers