Download Print this page

Advertisement

Quick Links

Model #
276KFDC
DISTRESSED ANTIQUE CHERRY FINISH
Tuscan Pantry
Assembly Instructions
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Gluing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this piece of
furniture.
Unload items from this unit prior to moving.
Do not overload shelves on this unit.
Before loading or moving this unit, check all screws
and supports for tightness.
For maximum stability, attach unit to the wall using
the enclosed hardware as per instructions.
Natural
characteristics
such as knots
provide a
natural feel.
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
which are defective, missing or damaged
during assembly. Please contact Whittier
Wood Products customer service department
directly (by phone, fax, mail or email) for
replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter, production code, quantity
needed, reason for replacement and your full
name and address along with a telephone
number in case we need to contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Fax: 541-687-2060 • Email: info@whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and Gluing Hints
completely before beginning.
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
We will replace any parts
Rev. 10/05

Advertisement

loading
Need help?

Need help?

Do you have a question about the 276KFDC and is the answer not in the manual?

Questions and answers

Summary of Contents for John Greenleaf 276KFDC

  • Page 1 Model # 276KFDC DISTRESSED ANTIQUE CHERRY FINISH Tuscan Pantry Service Policy: We will replace any parts Assembly Instructions which are defective, missing or damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts.
  • Page 2: Before Beginning Assembly

    276KFDC Tuscan Pantry – Parts List BEFORE BEGINNING ASSEMBLY: Check that the quantities of the parts received match those on parts list below. F — Door — Qty. 2 A — Top — Qty. 1 G — Front Leg — Qty. 2 H —...
  • Page 3 276KFDC Tuscan Pantry – Parts List (cont.) O — Front Crown Moulding — Qty. 2 ZD — 3/8" x 2½" Hex Bolt — Qty. 4 O – End view; Vue de l’extrémité; Vista lateral P — Right Crown Moulding — Qty. 2 ZE —...
  • Page 4: Tools Required

    3) The Facings are stamped “Left” and “Right” on the bottom edge. Glue the Sleepers (I) with the notch to the outside to the dowels in the Left and Right Facings (J & K). Secure in place with a #8 x 1¾" Pan Head Screw (ZA) into the predrilled holes in each notch. PAGE 4 — 276KFDC...
  • Page 5 #6x5/8" Philtruss Screws (X). FIG. 6 6) Insert two 5mm Dowels (ZL) into appropriate holes in each Apron (L, M, & NN). Be careful not to glue dowels into the screw holes. 276KFDC — PAGE 5...
  • Page 6 Front Legs (G). Do not try to pull the glides out after you have them in place. Hammer the Tack Glides (V) in the bottom of the Back Legs (H). Attach the legs to the apron assembly with Flat Washers (ZC) and 3/8"x2½" Hex Bolts (ZD). PAGE 6 — 276KFDC...
  • Page 7 When door is aligned properly using the elongated holes, retighten screws. A third screw may be inserted through the round hole in the hinge into the door. 276KFDC — PAGE 7...
  • Page 8 Tap Brad (ZP) into the hole in each Backing Plate (ZF). See FIGURE 13C. 14) When you have determined the location for your unit, install the Furniture Tipping Restraint (ZO). Carefully follow the instructions on the package. PAGE 8 — 276KFDC...
  • Page 9: Basic Equipment

    1-800-653-3336 Outside U.S. or Canada: 541-687-0213 Fax: 541-687-2060 • Email: info@whittierwood.com Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A. Gluing Hints Carefully read the glue manufacturer’s label and follow all instructions. These are general hints. Refer to the instruction sheet for detailed information on gluing your specific product.