Advertisement
Specifications and Supplemental Characteristics
Table 1-! lists
the
specifications
and
supplemental characteristics
of the
MPS
mainframe.
Module specifications
are
included
in
the appropriate module User's Guide. Specifications are wan-anted in the temperamre range of
0
to
55
degrees
C. Supplemental characteristics are not warranted, but are descriptions of minimum, maximum, or average performance
that has been determined by design or type testing.
Table 1-1. Specifications and Supplemental Characteristics
PERFORMANCE SPECIFICATIONS
AC
fnput Ratings
Standard:
87- 132 Vac
174- 250 Vac
Frequency tolerance:
47 - 63 Hz
SUPPLEMENTAL CHARACTERISTICS
Maximum AC Line Current Ratings
(with 8 power supply modules operating at maximum output)
100 Vac:
29 A rms
120 Vac:
25 A rms
200 Vac:
16 A rms
220/230 Vac:
16 A rms
240 Vac:
15 A rms
Maximum power input:
3200 VA; 1800 W maximum; 1600 W typical
GPIB Interface Capabilities
Languages:
Standard Commands for Programmable Instmments (see module
Programming Guide)
IEEE 488.2 Capabilities:
SH1, AH 1, T6, L4, SR 1, RL1, PPO, DC
!
, DTI, El, and CO
Serial Link Capabilities
(Multiple mainframes sharing one GPIB address)
Number of mainframes:
2
Number of modules:
16
Serial-linked power supplies:
total number of modules and serial-linked power supplies (Agilent
667xA/665xA/664xAy603xA) cannot exceed 16
Chain length:
30 m (iOO fi) maximum
TrigIn/TrigOut Characteristics
Maximum Ratings:
± 16.5 V between center conductor and chassis
Trig Out (HC TTL output):
Voi.
@
4 ma = 1,34 V maximum
VoL,
@
2 ma = 0.8 V maximum
Vqii 4 ma
=
2.66 V minimum
Veil 2 ma
=
3.18 V minimum
Trig in (10k pull-up):
Iil@4V =
700 pA
l,H
@5.25
V
=
200 pA
Vii^, = 0,8 V maximum
V|si
=
2.0 V minimum
General Information 11
Advertisement
