Alpine CDA-7832R Service Manual page 60

DP-L
SERIES
1. Switch/Motor P.C.Board disassembly
(1) Remove two screws @ and the spring @, remove
the Assy., Chassis Top. (See Figure 1)
(2) Remove two springs ©, remove the Assy., Arm
Disc Guide. (See Figure 1)
(3) Remove five Hooks (A), the parallel wire and two
wires. (See Figure 1)
The Switch/Motor P.C.Board can be removed.
1. AL VF /E-2-BRODBAR
(1) 2ARDRYDERTFVULIOREHL, Ver-v-
Ky SHIEHLET. (1S)
(2) 2ADASFULYI@EHL, Fob FL RD>
Hf FRILENALET. (1M)
(3) SHRO7Y 7 (A). NIL TF 4—-,
2EDTTV-EHLET.
WEE
ALY FSE-R-BMREANET,
Tightening torque: | @
RT hILZ :
3.2+0.2kg * cm
@
.
Hooks (A)
Assy., Rivet. Chassis Base
Assy., Chassis Top
Assy., Arm
Disc Guide
2. DP-Main P.C.Board disassembly
(1) Remove the solder (Ayand a screw @.
(See Figure 2)
(2) Remove all connectors connected to the
DP-Main P.C.Board.
The DP-Main P.C.Board can be removed.
(1) ¥m (A) E1AMDRVOKALET,
(2 BRR)
(2) DP-X 7 VRRICDE PSS TONKRIZ-*E
HUET,
MLE CG. DPX VRRIHNET,
Tightening torque :
RAL KIL :
3.2 £0.2kg * cm
®
DP-Main P.C.Board
x
Solder (A) ae
Assy., Rivet.
Chassis Base
Flexible P.C.Board
(from Pick-Up Unit) *xSolder (A)=34 (A)
<Figure 2 >
<2 >
<Figure 1>
<18i>
-16-