Table of Contents
Advertisement
en Cleaning and servicing
Put the appliance into standby
7.
mode.
→ "Put the appliance into standby
mode", Page 33
Cleaning and servicing
17 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
17.1 Tips on cleaning and
care
Wipe down the
housing and the
controls with
nothing but water
and a damp
cloth.
Remove all de-
tergent residue,
spray residue or
other residues
immediately.
Leave the appli-
ance door open
after use.
17.2 Moisture sensor
The moisture sensor in this appliance
measures how damp the laundry is
during the drying cycle. The appli-
ance changes the duration of the
automatic programme depending on
the residual moisture in the laundry.
Cleaning the moisture sensor
Over time, residue from limescale,
detergents and care products can
build up on the moisture sensor.
Clean the moisture sensor regularly.
44
This ensures the
parts of the appli-
ance will remain
clean and hy-
gienic.
Fresh deposits
are easier to re-
move without
leaving any
residue.
This allows the
residual water to
dry, reducing
odours in the ap-
pliance.
ATTENTION!
Hard or rough objects may damage
the moisture sensor.
Do not use hard or rough objects,
▶
abrasive cleaning products or steel
wool for cleaning.
Note: If you do not clean the appli-
ance as described, the appliance's
functionality may be impaired.
Open the door.
1.
Clean the moisture sensor with a
2.
sponge.
17.3 Condensation container
filter
During drying, fluff from the laundry
gets into the condensation. The filter
in the condensation container pro-
tects the appliance from fluff.
Clean the filter for the
condensation tank.
The filter is cleaned automatically
when the condensation container is
emptied. Check the filter regularly
and clean the filter if it is dirty.
Advertisement
Table of Contents
