Cleaning And Servicing; Moisture Sensor - Bosch WQB245B0BY User Manual And Installation Instructions

Pull out the condensation con-
5.
tainer horizontally and empty it.
Pour approx. 1.5 litres of hot
6.
mains water into the condensation
container.
Carefully swivel the condensation
7.
container horizontally and empty it
to rinse out any remaining appli-
ance care product.
Continuing the intensive
appliance care programme
Pour approx. 1.5 litres of hot
1.
mains water into the condensation
container.
Hold the filled condensation con-
tainer level so that no liquid spills
out.
Insert the condensation container
2.
so that it locks into place.
Press .
3.
a The appliance care programme
continues.
a "End" appears on the display and
a signal tone sounds once the ap-
pliance care programme has
ended.
Pull out the condensation con-
4.
tainer horizontally and empty it.
If you drain the condensation using
5.
the drain hose, remove the stopper
from the underside of the condens-
ation container and insert it into
the recess in the top of the con-
densation container. → Page 37
Insert the condensation container
6.
so that it locks into place.
Put the appliance into standby
7.
mode. → Page 29
Cleaning and servicing en

Cleaning and servicing

17 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
17.1 Moisture sensor
The moisture sensor in this appliance
measures how damp the laundry is
during the drying cycle. The appli-
ance changes the duration of the
automatic programme depending on
the residual moisture in the laundry.
Cleaning the moisture sensor
Over time, residue from limescale,
detergents and care products can
build up on the moisture sensor.
Clean the moisture sensor regularly.
ATTENTION!
Hard or rough objects may damage
the moisture sensor.
Do not use hard or rough objects,
▶
abrasive cleaning products or steel
wool for cleaning.
Note: If you do not clean the appli-
ance as described, the appliance's
functionality may be impaired.
Open the door.
1.
Clean the moisture sensor with a
2.
sponge.
39