en Laundry
Laundry
11 Laundry
Laundry
11.1 Preparing the laundry
ATTENTION!
Objects remaining in the laundry may
damage the laundry and the drum.
Remove all items from any pock-
▶
ets in your laundry before using
the appliance.
Note
The appliance and fabrics are
protected when you prepare your
laundry.
¡ Brush off sand and soil
¡ Sort the laundry according to col-
our and textiles and observe the
care labels
¡ Close all zips, Velcro fasteners,
hooks and eyes
¡ Remove curtain fittings and lead
strips
¡ Load the laundry unfolded into the
drum
¡ Spin the laundry before drying
Basic operation
12 Basic operation
Basic operation
12.1 Switching on the appli-
ance
Note: If you switch the appliance on
the first time after you have connec-
ted it to the electrical system, the
switch-on process takes up to one
minute.
Requirement: The appliance has
been correctly installed and connec-
ted.
→ "Installation and connection",
Page 12
Press
.
▶
32
The switch-on process takes a few
seconds.
Note: The lighting for the drum goes
out automatically.
12.2 Setting a programme
Press the required programme.
1.
→ "Programmes", Page 28
a The display shows the programme
settings.
If required, adjust the programme
2.
settings.
→ "Adjusting the programme set-
tings", Page 32
12.3 Adjusting the pro-
gramme settings
Depending on the programme and
programme progress, you can adjust
or activate/deactivate the settings.
Requirement: A programme is set.
→ "Setting a programme", Page 32
Adjust the programme settings.
▶
→ "Buttons", Page 24
Observe the information about op-
erating logic → Page 21.
Note: The programme settings are
not saved permanently for the pro-
gramme.