Table of Contents
Advertisement
en Cleaning and servicing
Basic setting
14.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press Inicio/Pausa + Carga
2.
and, at the same time, turn the
programme selector to position 2.
a The display shows the current
value.
Set the programme selector to the
3.
required position.
→ "Overview of the basic settings",
Page 33
To change the value, press
4.
Duración / Duração
.
To save the changes, switch off
5.
the appliance.
34
Programme
position
/ Termin.
Value
Description
13 A. If the installation protection
is changed to 10 A, the pro-
gramme duration and energy con-
sumption will be increased.
→ "Consumption values",
Page 44
Cleaning and servicing
15 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
15.1 Tips on cleaning and
Wipe down the
housing and the
controls with
nothing but water
and a damp
cloth.
Remove all de-
tergent residue,
spray residue or
other residues
immediately.
Leave the appli-
ance door open
after use.
care
This ensures the
parts of the appli-
ance will remain
clean and hy-
gienic.
Fresh deposits
are easier to re-
move without
leaving any
residue.
This allows the
residual water to
dry, reducing
odours in the ap-
pliance.
Advertisement
Table of Contents
