Asus PN64-E1 Series User Manual page 40

To install an M.2 SDD to the bottom cover
1. Remove the plastic film from the thermal pad.
2. Align and insert the 2280 M.2 SSD into its slot on the bottom cover.
3. Gently push down the 2280 M.2 SSD on top of the standoff and secure it
using one of the bundled screws.
Plastic film
NOTE:
• The specifications for the thermal pad used in this Mini PC is as follows:
Thickess: 2.0mm Size: 66mm x 20mm Thermal conductivity: 1.2 W/
mK Hardness: < 50 Sc
• Heat dissipation performance may still vary even when you have replaced
the thermal pad with one that meets the above specifications. To prevent
possible damage to the M.2 SSD, you should have the thermal pad replaced
by a service center near you.
40 PN Series
Thermal pad