Remote On/Off Switch - Cobra CPI1590-CBL Operating Instructions Manual

Remote On/Off Switch

Operation
Intro Operation Customer
Remote On/Off Switch (not included)
Assistance
An optional Remote On/Off Switch (see page 24 to order
accessories) can be connected to the Remote Jack
allowing you to turn the Cobra power inverter on or off
from a convenient location when the inverter is installed Installation
in an out of reach location .
Secondary Icons
Remote Switch
Notice Caution
Remote Jack
14
Warranty
Notes
Main Icons
Intro Operation Customer
Warning
Assistance
Installation
Secondary Icons
Notice Caution
Operation
Intro Operation
Operating Indicators
•
Indicators at the Output End of the unit show the unit's
power status and alarms for conditions that could cause
it to shut down .
Installation
Secondary Icons
Output Watts
Warranty
Notice
Notes
Over Current
Warning
Short Circuit
Operating Indicators
Customer Warranty
Assistance
Notes
Caution Warning
Power on – The Voltage Input
and Power Output indicators
automatically toggle between input
and output values at three-second
intervals . The three LEDs indicate
the mode the meter is in and the
three digits indicate the voltage
or power value .
Current Overload Protection –
If the inverter is overloaded,
it will shut down to protect itself .
The meter will flash as shown to
indicate Overload Protect .
To restore normal operation,
disconnect the excessive load
and turn the unit Off and On
again using the Power Button .
Short Circuit Protection – If the
AC output of the inverter is short-
circuited for one second or more,
it will shut down to protect itself .
The meter will flash as shown to
indicate Short Circuit Protect and
an alarm will sound .
To restore normal operation,
disconnect the short circuit and
turn the unit Off and On again
using the Power Button .
Nothing Comes Close to a Cobra
•
15
™