7; Brief Service Instruction U - Teac MV-3010 Service Manual

7. BRIEF SERVICE INSTRUCTION
7-1. REMOVING THE MAIN PCB
* Remove the Deck Mechanism as described in steps 6-1 and 6-2 of 6. REMOVAL OF THE DECK MECHANISM.
@ Remove the two screws.
@ Disconnect the Power Cord from the chassis.
(3) Remove the Main PCB from the three prongs on the chassis. (Do not hold the Tuner when removing the Main
PCB.) Remove the Sub PCB, if one is attached, from the Main PCB.
7-2. INSTALLING THE DECK MECHANISM
FOR BRIEF OPERATION
(D Attach the Deck Mechanism to the Main PCB removed
from the chassis. | У
Q) Fix ће two spacers of the Deck Mechanism to the back | e 8,
of the Main PCB with screws. |
@ Attach ће (N401) Connector to the Deck Mechanism.
(à Attach the Flexible Wire 9P (N201) to the Head Amp
Unit.
-12-