Table of Contents
Advertisement
6. REMOVAL OF THE DECK MECHANISM
6-1. REMOVING THE TOP COVER AND FP ASSY
(D Remove the five screws.
@ Remove the Top Cover.
(9 Remove the FP Assy, held in position by the eight prongs, the direction of arrow.
(à Remove the Bracket.
G) Remove the Sub PCB, if one is attached, from the Main PCB.
ж Attach the Face Plate with the Dust
Cover pushed open.
6-2. REMOVING THE DECK MECHANISM
@ Disconnect the Flexible Wire 9P (N201) from the Head Amp Unit.
@ Disconnect the Connector (N401) from the Deck Mechanism.
Remove three screws.
(8 Remove the Deck Mechanism.
** When handling the Deck
Mechanism, take care not
to touch the cylinder head.
"T=
Advertisement
Table of Contents
