Table of Contents
Advertisement
Cleaning and maintenance
Cleaning and maintenance
Daily cleaning
Daily cleaning
To achieve the best operating performance and longer service life, this product must be cleaned and maintained
frequently. Turn off the power before cleaning and maintenance. It is suggested that all surfaces be cleaned with
a damp cloth (neutral detergent is applicable) to keep this product clean and tidy.
Tips
Usually just wipe the surface and edges of the range hood.
It is suggested that it be wiped after each use.
Do not use abrasive powder, metal brushes, nylon brushes (containing abrasives) or scouring pads, etc. to
clean or scrub the machine (including the oil cup), so as not to damage the coating on the product surface.
Do not use strong alkaline detergent to clean the machine (including the oil cup).
Oil cup cleaning
Oil cup cleaning
① Remove the oil cup with reference to the fi gure on the right (the
direction to remove oil cup).
② Pour out the oil collected, and soak the oil cup in warm water with
diluted neutral detergent at a temperature of 40 ℃ to 50 ℃ , wait
for 5 to 10 minutes and clean the oil cup.
③ Put back the oil cup in place (refer to removal of the oil cup).
Tips
Check the oil cup regularly. It is suggested that the oil cup be
cleaned when the oil collected reaches about 80% of capacity of
the oil cup.
Grasp the oil cup with both hands when removing the oil cup,
otherwise oil in the oil cup may shake and overfl ow.
The direction to remove oil cup
7
Advertisement
Table of Contents
