Panasonic PalmCam PV-DC2090 Operating Instructions Manual page 49

Transferring Your Images (Windows 95/98)
I =tq il ilieL_lli_'JJ'T_ _ [,],1_
1
Select Programs/PalmCam 2.0/
PalmCam 2.0 from the START menu.
D_ ' Pe_r.cata2 0 Help
PalmCam Driver will open.
Note :
The commands in the COM Port Setup
menu are used to change the COM Port or
Baudrate, The application wilt communicate
with the Camera using the selected COM
Port.
1 Select ]Communication] from the [File],
and then select [COM Port Setup...].
.IDI
E_ _,_do_ Uelp
2 Select the Serial Port to connect with the
Camera.
• The default setting is COMI.
• If you press "AUTO SETUP", the Port to
which the Camera is connected is
detected and selected automatically.
3 Select the Baud rate.
• The default setting is 38400bps.
• Depending on the PC being used,
some baud rates may not be available.
Please refer to your PC manual,
FCOM Port......
(" COM_2
(" COM3
r-Baudrate
9_00
1920o
3_400
57600
115200
¢" COM4
_Auto Setup J
o°co, I
49