Ryobi PCL916 Operator's Manual page 8

WARNING:
When servicing, use only identical replacement parts.
Use of any other parts could create a hazard or cause
product damage.
WARNING:
Before inspecting, cleaning, or servicing the unit, stop
the heat pen, wait for the heat pen to cool, and remove
the battery pack. Failure to follow these instructions can
result in serious personal injury or property damage.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
NOTE: ILLUSTRATIONS START ON PAGE 9
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
MAINTENANCE
CLEANING THE HEAT PEN
The heat pen should be kept clean, dry, and free of oil or
grease. Only a mild soap and damp cloth should be used
to clean the heat pen. Do not allow liquid to enter the tool.
The high temperatures of the heat pen will cause the nozzle
to turn dark over time. This is normal and will not affect its
performance or life.
Ventilation openings must be kept clean and free of foreign
matter. The most effective method of cleaning the vents is
with compressed air. Do not attempt to clean by inserting
pointed objects through the openings.
STORAGE
Always allow the heat pen to cool to room temperature
before storing. Store the heat pen out of reach of children
and untrained individuals.
WARNING:
The tool's heat shield tip will stay hot for several minutes
after use. Always allow heat pen to cool before storage.
Following this rule will reduce the risk of serious personal
injury or property damage.
8 – English